Efergy Energy metering and monitoring Especificaciones descargar pdf (Pagina 15)

Step 3. Single tariff

TARIFF appears and 1 ﬂashes. Press [unit/set] to conﬁrm if you

have just one single tariff. Refer to section 10 if you have an elec-

tricity meter for dual tariffs.

Tip: During the entire installation process you may press [time pe-

riod] to save your settings and return to normal display mode.

Step 4. Costs

Set the correct tariff using the [◄] and [►] buttons. Press [unit/set]

to conﬁrm and continue.

Step 5. kg CO

(kg carbon dioxide per kWh)

The kg CO

/kWh can be adjusted with the [◄] and [►] buttons.

Press [unit/set] to conﬁrm and continue on to setting the alarm.

Step 6. Alarm (High-energy consumption alarm)

The default alarm value is set to 5 kW. If the alarm function is ac-

tivated and you consume more than 5 kWh a buzzer will sound.

The alarm activation value can be set using the [◄] and [►] but-

tons. Press [unit/set] to conﬁrm and then [time period] to exit the

settings mode.

Press [alarm on/off] on the back of the display unit to activate or

deactivate the alarm.

The symbol is displayed when the alarm is activated.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Sin comentarios

Efergy Energy metering and monitoring Especificaciones Pagina 15