Efergy Energy metering and monitoring Manual de instrucciones descargar pdf (Pagina 7)

DUAL TARIFF MODE

1110

Step 3. Single Tariff Set Up

On release you will see the symbol flash. If you are

charged one single tariff push Mode button to confirm. If

you have dual tariff rate, please see the following page.

Step 4. Electricity Cost

Default cost is set at 14p/kWh. This is the average price

per kWh electricity that suppliers charge. Use BWD and

FWD Buttons to change the cost per kWh. Press Mode

button to save your setting and to move onto alarm

setting.

Step 5. Carbon Emissions Ratio

Now set your cabon emissions ratio. This value can be

increased or decreased usind BWD and FWD. Press the

Mode Button to store the value. The European average is

0.50 kg.CO2/kWh. This is the default value.

Step 6. Alarm

Default alarm is set at 5kW. If the alarm function is

switched on, and you are using more than 5kW the alarm

will sound and a red light will glow from the bottom of the

display unit. The value can be decreased or increased

using the BWD and FWD. Press Mode Button to store the

value. Press History Button to exit the function setting

mode. To activate and deactivate the Alarm at any time

push Alarm Button on the reverse of the display.

Throughout the set-up process, push Esc Button at

any time, your settings will be saved & you will exit

the function setting mode.

BWD FWD ModeHistory

If you have a dual tariff rate meter you may want

to set-up the dual tariff function.

Step 1. Activation of Dual Tariff

Press and hold Mode Button for two seconds. On

release you will see the voltage setting flash. Press

Mode twice and you will move onto the tariff

selection setting.

Now you will see the symbol flash. Press BWD

or FWD to select dual tariff set up . Push Mode

button to confirm and the symbol will flash.

Step 2. Set Start & End Time For Tariff 1

Set the start time for Tariff 1 first using BWD or FWD

Buttons. Set the hours and press Mode Button to

save and move to minute set up. Set minutes

using BWD or FWD and pushing Mode Button to

confirm. Now the symbol will disappear

from the display and the symbol will appear.

Repeat the process for setting the time Tariff 1

ends.

2 seconds

BWD FWD ModeHistory

BWD FWDHistory

BWD FWD ModeHistory

1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sin comentarios

Efergy Energy metering and monitoring Manual de instrucciones Pagina 7

Comentarios a estos manuales